Software Development for Microcontrollers

Optimized Solutions for Embedded Systems

Microcontrollers are at the core of many modern electronic systems, from consumer electronics to industrial automation. Developing software for microcontrollers requires specialized knowledge and a deep understanding of embedded systems. Our software development services for microcontrollers are designed to deliver high-performance, reliable, and efficient solutions tailored to your specific needs.

1. Requirements Analysis & Feasibility Study

Needs Assessment: We start by analyzing your project requirements, including performance expectations, resource constraints, and intended application.
Feasibility Study: Evaluating the technical feasibility of your project, ensuring that the chosen microcontroller and software architecture can meet the required specifications.

2. Microcontroller Selection & Software Architecture Design

Microcontroller Selection: Based on your project's specific needs, we help you select the most suitable microcontroller, considering factors such as processing power, memory, I/O capabilities, and cost.
Software Architecture Design: We design the software architecture, focusing on efficiency, modularity, and scalability, ensuring that the software can be easily maintained and upgraded as needed.

3. Firmware Development

Low-Level Programming: Developing low-level firmware that interacts directly with the microcontroller's hardware, ensuring optimal performance and resource utilization.
Peripheral Integration: Writing drivers and code to interface with various peripherals such as sensors, actuators, communication modules, and more.
Real-Time Operating Systems (RTOS): If required, we implement and integrate an RTOS to manage tasks and processes in real-time, enhancing the system's responsiveness and reliability.

4. Embedded Software Development

Custom Application Development: Creating custom applications tailored to your specific use case, whether it's for automation, control systems, IoT devices, or other embedded applications.
Communication Protocols: Implementing and optimizing communication protocols (e.g., I2C, SPI, UART, CAN, Bluetooth, Wi-Fi) to enable seamless data exchange between the microcontroller and other components.
Power Management: Developing power-efficient code to extend battery life in portable and low-power devices.

5. Testing & Debugging

Simulation & Emulation: Using advanced tools to simulate and emulate the microcontroller's environment, allowing for thorough testing before deployment.
In-Circuit Debugging: Performing in-circuit debugging to identify and resolve issues at the hardware-software interface, ensuring smooth operation in real-world conditions.
Stress Testing: Conducting stress tests to verify the software's stability and reliability under extreme conditions.

6. Optimization & Finalization

Code Optimization: Refining the code to improve execution speed, reduce memory usage, and enhance overall efficiency.
Safety & Security: Implementing safety-critical features and security measures to protect against vulnerabilities, ensuring that the software meets industry standards and certifications where applicable.
Documentation: Providing comprehensive documentation for the developed software, including code annotations, user manuals, and maintenance guides.

Why Choose Our Microcontroller Software Development Services?

Expertise in Embedded Systems: Our team has extensive experience in developing software for a wide range of microcontrollers and embedded systems, ensuring high-quality results.

Tailored Solutions: We deliver customized software solutions that align with your specific project requirements, from low-power IoT devices to complex control systems.

Efficiency & Performance: We focus on optimizing software for performance and efficiency, ensuring that your system operates reliably within the constraints of the microcontroller.

Comprehensive Testing: Our rigorous testing process guarantees that the software performs as expected, reducing the risk of issues in the final product.

Let us provide the expertise you need to develop robust and efficient software for your microcontroller-based projects. Whether you're starting from scratch or need to enhance an existing system, our specialized services will help you achieve your goals.

Microprocessors & Microcontrollers:

STMicroelectronics:

STM32F Series:
- STM32F0: Ultra-low power, entry-level Cortex-M0 microcontrollers, ideal for cost-sensitive applications.
- STM32F1: Mainstream Cortex-M3 microcontrollers offering a balance of performance and power consumption.
- STM32F2: High-performance Cortex-M3 microcontrollers with advanced peripherals for high-speed connectivity.
- STM32F3: Mixed-signal Cortex-M4 microcontrollers, combining DSP and FPU capabilities with analog features.
- STM32F4: High-performance Cortex-M4 microcontrollers with DSP and FPU, widely used in consumer and industrial applications.
- STM32F7: Cortex-M7 microcontrollers delivering the highest performance in the STM32 family, with advanced processing and communication features.
STM32H Series:
- STM32H7: Dual-core Cortex-M7/M4 microcontrollers offering high processing performance and memory bandwidth for complex applications.
STM32G Series:
- STM32G0: Low-power Cortex-M0+ microcontrollers, designed for cost-effective, low-power applications.
- STM32G4: Mixed-signal Cortex-M4 microcontrollers with rich analog peripherals, designed for high-performance applications.
STM32L Series:
- STM32L0: Ultra-low-power Cortex-M0+ microcontrollers, ideal for battery-powered and energy-sensitive applications.
- STM32L1: Ultra-low-power Cortex-M3 microcontrollers, offering a good balance between performance and power efficiency.
- STM32L4: Ultra-low-power Cortex-M4 microcontrollers with DSP and FPU, optimized for energy efficiency in demanding applications.
- STM32L5: Ultra-low-power Cortex-M33 microcontrollers with enhanced security features, suitable for IoT and secure applications.
STM32WB Series:
- STM32WB: Wireless microcontrollers combining a Cortex-M4 and a Cortex-M0+ core, with Bluetooth 5.0 and 802.15.4 (Zigbee, Thread) support.
STM32WL Series:
- STM32WL: Wireless microcontrollers with integrated sub-GHz radio, combining a Cortex-M4 core and a Cortex-M0+ core, designed for LoRa and Sigfox protocols.

Texas Instruments:

TM4C123: Part of the Tiva C Series, these Cortex-M4F microcontrollers are designed for industrial applications requiring real-time processing.
MSP430FR: Ultra-low-power microcontrollers featuring FRAM technology, suitable for energy-efficient applications.
SimpleLink CC Series:
- CC13xx: Sub-1 GHz wireless MCUs designed for long-range, low-power wireless communication.
- CC26xx: Low-power, multi-protocol wireless MCUs supporting Bluetooth Low Energy (BLE), ZigBee, and Thread.
- CC32xx: ARM Cortex-M4 wireless microcontrollers with integrated Wi-Fi for IoT applications.

Microchip:

PIC12: 8-bit microcontrollers with minimal pin count, designed for simple applications requiring low power and small footprint.
PIC16: Popular 8-bit microcontrollers, known for their versatility in various general-purpose applications.
PIC18: High-performance 8-bit microcontrollers with enhanced core and peripherals, suitable for more complex embedded systems.

Atmel (now part of Microchip):

ATtiny: Small-sized 8-bit microcontrollers ideal for simple, space-constrained applications.
ATmega: Versatile 8-bit microcontrollers widely used in Arduino platforms, known for ease of use and rich peripheral sets.
Xmega: High-performance 8-bit microcontrollers with enhanced peripherals, designed for demanding applications requiring higher processing power.

Silicon Labs:

EFM32: Energy-friendly 32-bit microcontrollers based on ARM Cortex-M0+/M3/M4 cores, optimized for low-power operation.
Precision32: High-performance 32-bit microcontrollers with advanced analog and digital peripherals, suitable for precision applications.
C8051: 8-bit microcontrollers with high-speed and mixed-signal capabilities, offering a wide range of analog peripherals.

NXP:

Kinetis K Series: High-performance Cortex-M4/M0+ MCUs with scalable power efficiency.
Kinetis L Series: Ultra-low-power Cortex-M0+ MCUs, ideal for cost-sensitive applications.
LPC Series:
- LPC800 Series: Cost-effective Cortex-M0+ MCUs, perfect for simple applications.
- LPC1100/1300 Series: Cortex-M0/M3 MCUs designed for general-purpose embedded applications.
- LPC1700/1800 Series: Cortex-M3/M4 MCUs, offering balanced performance and power consumption.
- LPC54000 Series: High-performance Cortex-M4/M0+ MCUs, suitable for IoT and embedded systems.
- LPC5500 Series: Advanced Cortex-M33 MCUs with enhanced security features.
i.MX RT Series:
- i.MX RT Series: Crossover MCUs combining high-performance Cortex-M7 cores with real-time functionality, bridging the gap between microcontrollers and applications processors.

Nordic Semiconductor:

nRF52: Multi-protocol Cortex-M4 microcontrollers with integrated Bluetooth Low Energy (BLE) and NFC, popular in IoT and wearable devices.
nRF53: Dual-core Cortex-M33 microcontrollers with advanced security features, supporting BLE, Bluetooth Mesh, and other wireless protocols.

Interface Expertise

Microcontroller Interfaces:

SPI (Serial Peripheral Interface):
- Standard and high-speed serial communication protocols, including SPI, QSPI (Quad SPI), and HS-SPI (High-Speed SPI), for efficient data transfer between microcontrollers and peripheral devices.
I2C (Inter-Integrated Circuit):
- Multi-master, multi-slave communication protocol ideal for connecting low-speed peripherals such as sensors, EEPROMs, and ADCs to microcontrollers with minimal pin usage.
USART/UART (Universal Synchronous/Asynchronous Receiver/Transmitter):
- Versatile communication protocols for serial data exchange between microcontrollers and other devices, with support for full-duplex and half-duplex modes.
USB (Universal Serial Bus):
- Comprehensive USB interface capabilities, including OTG (On-The-Go) for dual-role devices, as well as USB Device and Host modes for a wide range of peripheral connectivity options.
Ethernet TCP/IP Stack:
- Integration of Ethernet networking capabilities within microcontrollers, enabling TCP/IP communication for embedded systems requiring internet or local network connectivity.

Fieldbus Interfaces:

HART (Highway Addressable Remote Transducer):
- Field communication protocol used in industrial automation, enabling digital communication over existing analog wiring systems for smart field devices.
Modbus RTU (Remote Terminal Unit):
- Industry-standard serial communication protocol, commonly used in SCADA systems for communication with PLCs, sensors, and other industrial devices.
CAN (Controller Area Network) / CAN-FD (Flexible Data-rate):
- Robust multi-master serial bus protocol for real-time communication in automotive and industrial environments, with support for standard CAN, CAN-FD, CANopen, and LIN (Local Interconnect Network).
M-Bus (Meter-Bus):
- European standard communication protocol for remote reading of consumption meters, such as electricity, gas, and water meters.
RS485/RS422/RS232:
- Industry-standard serial communication protocols, offering differential signaling for noise immunity (RS485/RS422) and simple, robust point-to-point communication (RS232).

Real-Time Ethernet Protocols:

Modbus TCP:
- Ethernet-based variant of the Modbus protocol, enabling real-time communication over TCP/IP networks in industrial automation systems.
EtherNet/IP (Industrial Protocol):
- Industrial Ethernet protocol based on the Common Industrial Protocol (CIP), used for real-time control and information exchange in automation systems.

Wide Area Network (WAN) Interfaces:

LoRaWAN (Long Range Wide Area Network):
- Low-power, long-range wireless communication protocol ideal for IoT applications, enabling connectivity over large distances with minimal power consumption.
Sigfox:
- Low-power, narrowband IoT communication protocol, optimized for low data rate and energy-efficient communication over long distances.
NB-IoT (Narrowband IoT):
- Cellular communication standard designed for low-bandwidth IoT applications, offering extended coverage and long battery life.
2G/3G/4G/5G Cellular Networks:
- Mobile communication technologies enabling wide area wireless connectivity for embedded systems, ranging from legacy 2G to high-speed 5G for various IoT applications.

Midrange Area Network (MAN) Interfaces:

Bluetooth Low Energy (BLE):
- Low-power wireless communication protocol designed for short-range communication in IoT, wearable devices, and smart home applications.
ZigBee / Thread:
- IEEE 802.15.4-based wireless communication protocols, designed for low-power, low-data-rate, and secure mesh networking in home automation and industrial control.
ISM Band:
- License-free frequency bands (such as 433 MHz, 868 MHz, 915 MHz) used for short-range wireless communication in industrial, scientific, and medical applications.
NFC (Near Field Communication):
- Short-range wireless communication protocol for data exchange over a few centimeters, widely used in contactless payment systems, access control, and device pairing.

Embedded Development Tools Expertise

Keil uVision IDE: Industry-standard IDE for ARM microcontroller development, supporting a wide range of ARM Cortex devices.
IAR Embedded Workbench: Comprehensive IDE known for its powerful debugging and optimization tools for embedded systems.
Segger Embedded Studio IDE: Cross-platform IDE offering robust features for ARM Cortex-based development.
Code Composer Studio IDE: Integrated development environment for Texas Instruments processors, with support for real-time debugging.
STM32CubeIDE: Complete development environment for STM32 microcontrollers, integrating all tools and libraries.
MPLAB X IDE: Microchip’s IDE for PIC, dsPIC, AVR, and SAM microcontrollers, with powerful debugging and simulation tools.
Simplicity Studio: IDE by Silicon Labs for EFM32, EFR32, and other Silicon Labs devices, with a strong focus on energy efficiency.
MCUXpresso IDE: NXP's comprehensive development environment for ARM Cortex-M devices, featuring a user-friendly interface and advanced debugging capabilities.
GCC Cross Compilation: Expertise in using GCC for cross-compiling code across different architectures, ensuring portability and performance optimization.
Zephyr RTOS Integration:: Experience in development and integration with th Zephyr Real-Time Operating System, a scalable, secure, and highly portable open-source solution for embedded systems. Extensive use of Zephyr in complex multi-threading applications and for low-power designs, with support for Bluetooth LE, IEEE 802.15.4, and other communication protocols.)

Microcontroller Software Development

At Mitkov Systems GmbH we focus on delivering reliable software solutions for your microcontroller-based devices. Our work centers on cost-effective microcontroller software development that meets the specific needs of your project.

We specialize in writing embedded software for microcontrollers, ensuring your hardware functions as intended, efficiently and consistently. Whether you need to bring a new device to life or enhance an existing one, our team develops robust and optimized code.

Our approach is to provide custom microcontroller firmware. We don't use generic solutions; instead, we build software tailored precisely to your unique hardware and application requirements. This ensures optimal performance and resource utilization for your embedded system.

Through our comprehensive microcontroller programming services, we handle everything from initial code architecture to final testing and debugging. We work with various microcontroller families and complexities, providing the programming expertise needed for your project's success.

Our expertise includes essential bootloader development for microcontrollers, enabling secure and reliable updates for your devices. This foundation is key to maintaining and evolving your product in the field.

For battery-powered or energy-sensitive applications, we focus on intelligent low-power microcontroller design. We implement strategies to minimize energy consumption without sacrificing performance, extending device lifespan and reducing operational costs.

We also develop crucial middleware development for microcontrollers, bridging the gap between your hardware and application layers. This simplifies development and enhances system functionality by providing reusable software components and APIs.

Ensuring software quality is paramount. Our services include thorough embedded software debugging to identify and resolve issues efficiently. We employ rigorous processes for testing firmware, validating performance and stability across various scenarios.

To guarantee code integrity and reliability, we perform detailed unit testing for microcontrollers, verifying individual software components before integration. Additionally, our commitment to secure embedded software integrates robust security measures from the ground up, protecting your devices and data from vulnerabilities.

Partner with Mitkov Systems GmbH for specialized embedded software services that build confidence in your products. Contact us today to discuss your project requirements.

Location

We are deeply rooted in Hessen, Germany, operating from an innovation-rich area encompassing Frankfurt, Darmstadt, and Bensheim. This local presence ensures we're not only accessible but also well-attuned to the diverse needs of businesses within this thriving region.

Common Issues

Looking for the solution to a specific problem? Visit the link below to find out some common issues we can help with.

Common Issues

Electronic Development

Bringing Your Ideas to Life with Precision and Reliability

At the heart of every successful electronic product is a well-designed and meticulously developed electronic system. Our electronic development services are tailored to ensure your project's success, from the initial evaluation to the final design, focusing on robustness and compliance with industry standards... Explore More

Software Development for Embedded Linux

Harnessing the Power of Linux for Embedded Systems

Embedded Linux has become the platform of choice for many embedded systems due to its flexibility, scalability, and extensive support for a wide range of hardware. Our software development services for embedded Linux are tailored to meet the unique demands of your project, from custom kernel development to full-scale application deployment... Explore More

Web Applications Development

Need a powerful website that truly performs?

We develop bespoke web solutions leveraging Laravel and WordPress, meticulously crafted to optimize performance and achieve your business objectives. Whether your needs demand a robust, scalable web application or an intuitive, efficient content management system, our expertise ensures a reliable and impactful digital presence. Explore More